PROCEDURE
REMOVE VACUUM PUMP PULLEY
Using soft jaws, place the vacuum pump in a vise, and remove the pulley lock nut and vacuum pump pulley.
REMOVE VACUUM PUMP VACUUM HOSE UNION
Using SST, hold the check valve sub-assembly, and remove the union bolt, vacuum pump vacuum hose union and 2 gaskets.
REMOVE CHECK VALVE SUB-ASSEMBLY
Remove the check valve sub-assembly and gasket.
REMOVE VACUUM PUMP END COVER
Remove the 4 screws and vacuum pump end cover.
REMOVE VACUUM PUMP SHAFT
Using a plastic-faced hammer, tap out the vacuum pump shaft with vacuum pump bearing.
REMOVE STOP RING
Remove the stop ring from the vacuum pump shaft.
REMOVE VACUUM PUMP BEARING
Using a press, press out the vacauum pump bearing from the vacuum pump shaft.
REMOVE VACUUM PUMP BLADE
Remove the 2 secrews and end plate.
Remove the vacuum pump rotor and 5 vacuum pump blades.
REMOVE O-RING
Remove the O-ring from the vacuum pump case.
REMOVE OIL SEAL
using a screwdriver, remove the oil seal.