INSTALL EXTENSION MODULE
Connect the connector to install the extension module.
Connect each connector to install the navigation wire and radio cable.
INSTALL NO. 2 RADIO RECEIVER BRACKET
w/o Navigation System:
Install the No. 2 radio receiver bracket with the 4 screws.
w/ Navigation System:
Install the No. 2 radio receiver bracket with the 6 screws.
INSTALL NO. 1 RADIO RECEIVER BRACKET
w/o Navigation System:
Install the No. 1 radio receiver bracket with the 4 screws.
w/ Navigation System:
Install the No. 1 radio receiver bracket with the 6 screws.
INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY
Engage the 4 claws.
Install the instrument cluster center finish panel sub-assembly with the 4 screws.
INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET
Connect each connector.
Engage the 2 clips.
Install the radio and display receiver assembly with bracket with the 4 bolts.
INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY
Engage the 4 guides and 9 claws to install the No. 2 instrument panel speaker panel sub-assembly.
INSTALL CONSOLE BOX SUB-ASSEMBLY
Engage the 2 claws and 4 clips.
Engage the 2 clamps.
Connect the connector.
Install the clip.
Install the console box sub-assembly with the 2 screws <E> or <F>.
INSTALL POSITION INDICATOR HOUSING ASSEMBLY
Engage the 3 clips to position indicator housing assembly.
Connect the connector.
Move the shift lever to P.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Turn the shift lever knob clockwise to install the shift lever knob sub-assembly.
INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
Connect the connectors.
Engage the 5 guides, 2 clips and claw.
Install the lower instrument panel sub-assembly with the bolt <C> and 4 screws <E> or <F>.
INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Engage the guide and 3 claws to install the No. 2 instrument panel under cover sub-assembly.
INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
Tech Tips
Use the same procedure as for the LH side Click here.
INSTALL FRONT DOOR SCUFF PLATE RH
Tech Tips
Use the same procedure as for the LH side Click here.
INSTALL AIR CONDITIONING CONTROL ASSEMBLY
Connect the connector.
Engage the 2 clips and 4 guides.
Remove the protective tape.
*1 | Protective Tape |
Install the air conditioning control assembly with the screw.
INSTALL CONSOLE BOX ASSEMBLY
Connect the connectors.
Engage the 2 claws.
Install the screw and 2 clips.
Install the console box assembly with the 2 bolts.
INSTALL NO. 2 CONSOLE BOX CARPET
Install the No. 2 console box carpet.
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
Connect the connectors.
Engage the 6 clips to install the upper console panel sub-assembly as shown in the illustration.