Tech Tips
Use the same procedure for LHD and RHD vehicles.
The procedure listed below is for LHD vehicles.
INSTALL LUMBAR FRONT POWER SEAT SWITCH
Install the switch with the 2 screws.
INSTALL FRONT SEAT CUSHION SHIELD LH WITH FRONT SEAT INNER NO. 1 CUSHION SHIELD
for Driver Side:
Connect the connector.
Attach the hook to install the front seat cushion shield LH with front seat inner No. 1 cushion shield.
Install the 2 screws.
Attach the 2 claws and install the 2 screws.
INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
Attach the 4 claws to install the knob.
INSTALL RECLINING POWER SEAT SWITCH KNOB
Attach the 2 claws to install the knob.
INSTALL FRONT SEAT ASSEMBLY
Install the front seat assembly Click here.
CHECK SRS WARNING LIGHT
Check the SRS warning light Click here.
INSPECT FRONT SEAT ASSEMBLY
Check the front seat assembly Click here.
Check the seat heater operation.
Turn the ignition switch to ON.
Operate the seat heater switch ON.
Wait 5 minutes or more and confirm that the seat surface becomes warm.