REMOVE BATTERY
Disconnect the cable from the negative (-) battery terminal.
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
for LHD:
Disconnect the 2 clamps.
for RHD:
Disconnect the 2 clamps.
Disconnect the cable from the positive (+) battery terminal.
Remove the nut and the battery clamp.
Remove the battery insulator.
Remove the battery.
REMOVE SECURITY HORN ASSEMBLY
Remove the bolt.
Disconnect the connector and remove the security horn assembly.