REMOVE FRONT DIFFERENTIAL CASE FRONT TAPERED ROLLER BEARING
*a | Turn |
*b | Hold |
Using SST, remove the front differential case front tapered roller bearing from the front differential case.
REMOVE FRONT DIFFERENTIAL CASE REAR TAPERED ROLLER BEARING
*a | Turn |
*b | Hold |
Using SST, remove the front differential case rear tapered roller bearing from the rear differential case.
REMOVE FRONT DIFFERENTIAL RING GEAR
*1 | Matchmark |
Put matchmarks on the front differential ring gear and front differential case.
Remove the 16 bolts.
Using a plastic-faced hammer, remove the front differential case.
REMOVE FRONT DIFFERENTIAL PINION SHAFT STRAIGHT PIN
Using a 5 mm pin punch and hammer, tap out the front differential pinion shaft straight pin from the front differential case.
REMOVE NO. 1 FRONT DIFFERENTIAL PINION SHAFT
Remove the No. 1 front differential pinion shaft from the front differential case.
REMOVE FRONT DIFFERENTIAL SIDE GEAR
Remove the 2 front differential pinions, 2 front differential pinion thrust washers, 2 front differential side gears and 2 front differential side gear thrust washers from the front differential case.
Tech Tips
While rotating the front differential side gears, remove the 2 pinions and 2 pinion thrust washers.